Cover Support One Cover Lifter

Description

Step #1

Position your spa cover (in the closed position) on the spa and ensure all corners are lined up with the corners on the spa

Step #2

Slide the under-mount base brackets under the spa (See Figure 1)

Step #3

Attach the Pivot Arms to the Base Brackets (see Figure 2). Then, tilt them into the upright/vertical position.

Step #4

Insert the long end of the Support Arm into the centre coupler, then slide the support arms into pivot arms. Next, insert the Lower Support into the coupler and slide the Lower Support Arms into the remaining end of the Pivot Arms. (See Figure 3)

Note: The upper support arm is longer than the two support arms.

Step #5

Lay the Covermate on the spa cover. Adjust the upper coupler and support arms so the coupler is parallel to the spa cover hinge about 1/2″ away. (See Figure 4)

Step #6

Slip the black hand grips to the edge of the spa cover and snap the black screw head covers on.