- Initial dosage for pool water is 80 mL of Aqua-Guard Algaecide per 10,000 L of pool water.
- Weekly maintenance dosage is 30 mL of Aqua-Guard Algaecide per 10,000 L of pool water.
- For pool water with visible algae, superchlorinate following label instructions of superchlorination product and wait 24 hours before adding weekly maintenance dosage.
- When superchlorination is not employed, add 120 mL of Aqua-Guard Algaecide per 10,000 L of pool water.
-
Sale!
Aqua-Guard Concentrated Liquid Algaecide kills and controls stubborn algae growth and moulds in swimming pool water. Aqua-Guard Algaecide is a non-foaming algaecide that is effective at any pH, and helps to flocculate dead algae and sediment to the pool bottom for easy cleanup. It is effective on green algae and other algae. For best distribution, dilute Aqua-Guard Algaecide in a pail of water and pour around the pool. -
Sale!Out of stock
Start the pool season off right by using the Aqua-Guard Deluxe Opening Kit. This kit includes 3 essential chemicals to help your pool shine and treats up to 40,000 L of pool water! Kit Includes:- 1 x 500 mL Aqua-Guard Meta-Sol– protects pool surface from scaling and staining
- 1 x 500 g Aqua-Guard Oxy-Out – cleans pool of organic matter
- 1 x 500 mL Aqua-Guard Algaecide – prevents algae from forming
-
Sale!
Meta Sol is a product that sequesters and coats metal ions prevalent in water. By doing so, the Meta Sol prevents staining that these metals would cause on the pool surfaces. Meta Sol will also help prevent calcium deposits along the pool and in the equipment. Meta Sol should be diluted and administered to the pool evenly, and should also be added weekly if a heater or copper algaecides are present. -
Sale!
An initial dose of Stabilizer is required in fresh pool water to maintain a clear pool throughout the summer. Stabilizer is an essential chemical in protecting chlorine from evaporating due to the sun's UV rays - think of Stabilizer as "sunscreen" for chlorine! Stabilizer should be balanced between 20 - 30 ppm for the best efficiency between your chlorine sanitization and protection from the sun. These tablets are perfect for pools with cartridge filters. Simply add the required amount through the pool skimmer. Net Contents: 4 Pucks (800g total) -
Sale!
- A concentrated twin action low-foam formulation removes scale and breaks down body oils, suntan lotion and grease that build up on filter media
- Regular use assures proper filtration of the water
-
Sale!
Oxy-Out is a chlorine-free shock treatment for swimming pool water. When used regularly, it will oxidize foreign organic contaminants which reduce the effectiveness of chlorine as a disinfectant. Oxy-Out contains no calcium or chlorine and is completely soluble. It should be used as a shock treatment only. Oxy-Out is not a sanitizer or algaecide and must be used in conjunction with a sanitizer. Broadcast Oxy-Out on the surface of the pool at a rate of 1 kg per 75,000 litres every two weeks. Concentrate the dosage in the deep end. In periods of heavy bathing or wet weather, use more frequently. For greatest effectiveness, make sure your pH is between 7.2 - 7.8. Once you're done, just wait 15 minutes and you are good to swim! Available Net Contents: 1 kg, 7 kg -
Sale!
Alliance ElaBORATE plays a vital role in swimming pool care. Not only is ElaBORATE working steady behind the scenes to stabilize pH levels and inhibit algae growth but it also provides bathers with noticeably soft, sparkling clear water and reduced eye and skin irritation. Skin no longer feels dry or itchy after swimming with this remarkable water conditioner! With pump running continuously, add 2Kg per 10,000L of pool water by slowly pouring product into skimmer. Add product in 3 separate doses, and let the water circulate 1 - 2 hours after each application. Test borate levels monthly, or as needed, to maintain a reading of 30 - 50 ppm. Available Net Contents: 6kg. For more information about the Alliance Pool Care System such as benefits and frequently asked questions, click here. -
Sale!
Clear Cube is intended for use in Sand Filters Only.
Rapidly clears cloudy water. Removes micro particles that normal filtration systems cannot. Boosts chemical efficiency and performance. Slow dissolving time release formula.DIRECTIONS FOR USE:
Directions for use: 1. Peel off the backing label, slide the AQUA CLEAR CUBE out of the casing and place it in skimmer basket. 2. Resume normal pool care. 3. Should the pump start to lose pressure then backwash or clean the filter. 4. Add Aqua Clear Cube every 3 – 4 weeks. Net Contents: 70g -
Sale!
Liquid filter cleaner that serves as a chemical rinse agent to clean and refresh the sand in your pool filter. Filter Rinse removes organic and inorganic debris from the sand that backwashing alone cannot remove. Filter Rinse is to be used with sand filters only. Net Contents: 1L -
Sale!
Aqua-Guard Salt Cell Cleaner is an inhibited acidic product designed to remove scale to improve the efficiency of the cell to produce chlorine. Aqua-Guard Salt Cell Cleaner is compatible with all salt generators. Net Contents: 1L -
Sale!
Vinyl Cleaner is specially formulated to remove stubborn rings from around pool vinyl and tile, as well as diving boards and steps. Comes with a bonus sponge! Net Contents: 650mL -
Sale!
A fast-acting clarifier that quickly resolves cloudy pool water. Clarita improves filtration and leaves water crystal clear in just 24 hours. Clarita tabs come in pre-measured doses, making them easy to use. No direct product handling required; safer for users. Net Contents: 125g (5 x 25g) -
Sale!
Cleans and deodorizes winter covers, solar blankets and water bags. This product also provides protection to covers and vinyl’s during storage. It removes stubborn stains, grease, and grime. Net Contents: 1L -
Sale!
Enjoy your pool oasis with Sifto® pool salt.- Extra fine, quick dissolving crystals for easier mixing into pool water
- Contains a natural stain fighter for a beautiful pool
- Provides water that is gentler on the eyes, skin and hair
- Eliminates need to handle hazardous chemicals
- High-purity salt for pool equipped with salt water chlorinators
- Delivers the enhanced swimming experience you and your guests desire
-
Sale!
An initial dose of Stabilizer is required in fresh pool water to maintain a clear pool throughout the summer. Stabilizer is an essential chemical in protecting chlorine from evaporating due to the sun's UV rays - think of Stabilizer as "sunscreen" for chlorine! Stabilizer should be balanced between 20 - 30 ppm for the best efficiency between your chlorine sanitization and protection from the sun. This liquid is perfect for quick and simple application of Stabilizer. Just pour around the pool! -
Sale!Out of stock
Start the pool season off right by using the Aqua-Guard Deluxe Opening Kit. This kit includes 3 essential chemicals to help your pool shine and treats up to 80,000 L of pool water! Kit Includes:- 1 x 1 L Aqua-Guard Meta-Sol– protects pool surface from scaling and staining
- 1 x 1 Kg Aqua-Guard Oxy-Out – cleans pool of organic matter
- 1 x 1 L Aqua-Guard Algaecide – prevents algae from forming
-
Sale!
AQUA Liquid Algaecide controls algae in swimming pool waters and can also be used to store vinyl winter covers throughout the summer. Weekly maintenance dosage is 200 mL per 10,000 L. Net Contents: 3.6 L -
Sale!
Liquid Algaecide 10% helps to control algae in swimming pool waters and when storing your winter cover.DIRECTIONS FOR USE
1.) Initial dosage for pool water having no visible algae is 200 mL of Algaecide 10% per 10,000 L of pool water. 2.) Weekly maintenance dosage is 100mL Algaecide 10% per 10,000 L of pool water. 3.) For pool water with heavy visible algae, superchlorinate and wait for at least 24 hours before adding weekly maintenance dosage. 4.) For visible algae, when superchlorination is not employed, add 500 mL of Algaecide 10% per 10,000 L of pool water. When algae have turned brown, brush the walls of the pooll and remove the dead algae by vacuuming and filtering. Backwash / clean the filter as needed. -
Sale!
AQUA Salt Cell Cleaner is a commercial grade inhibited acidic product designed to remove scale to improve the efficiency of the well to product chlorine. For use with all salt cell generators. To use, fill the cell with 1 L of AQUA Salt Cell Cleaner and let it stand for 10 minutes. Then rinse the cell with fresh water. Net Contents: 1L -
Sale!
Easily screws onto the end of your salt cell to make cleaning a breeze! Use with our Salt Cell Cleaner!
