Stain Out & Stain Prevent Bundle (In-Store Pickup Only)

Naturally Aqua Stain Out can be used on all types of pool surfaces. Must be used in conjunction with Naturally Aqua Stain Prevent. Make sure the water is balanced before using Naturally Aqua Stain Out. Chlorine and bromine levels should be 1 ppm or less.

Directions:

1. Add 500 g of Naturally Aqua Stain Out per 40,000 L, sprinkling the product evenly over the surface where the stain is present. Keep the filtration system on.
2. Brush the stained areas.
3. After 1 hour add Naturally Aqua Stain Prevent.
4. After 24 hours vacuum the entire surface and clean the filter. Sand filters can be back washed, D.E. and cartridge filters should be removed and cleaned.
5. For complete removal of metals in the water add Naturally Aqua CuLator to the skimmer to prevent future staining. CuLator acts like a magnet and draws all the metals to it.

Note: Do not add any shock treatment or chlorine until the surface has been fully vacuumed and the filter cleaned. Have the water tested and balanced.