Description
The clean you need without the hassle. The Maytronics Dolphin Nautilus CC Plus robotic pool cleaner takes the work out of pool cleaning with its simple operation and weekly scheduler. This robot has a low operating cost, so you don’t have to sacrifice a high energy bill for a clean pool. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls will be left exceptionally clean.
Limited Wifi connectivity lets you start the cleaning cycle and manage your weekly cleaning schedule with ease from the MyDolphin Plus App.
Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.
Includes: Robot Vacuum, Fine Filters, Power Supply, User Manual & Quick Start Guide
Frequently Asked Questions
We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.
Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.
Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.
The Dolphin requires a standard 120v outlet for power.
Dolphin robotic pool cleaners are best used in temperatures between 65 and 93 degrees.
When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.
The simple answer is “no” but Nautilus CC will try very hard to clean your steps with little success. No swimming pool robotic cleaner does this well. They tend to reach the first step and maybe the second thinking in hopes of reaching a wall surface. Once it is too close to the surface, it will then quickly want to turn around in search of a more stable surface. We recommend using your wall brush before or during the start of your robot’s cycle to brush any debris on your steps or shallow ledges into the pool where Nautilus CC can better handle it.
