Description
Our Aboveground pool covers include a coated cover cable and winch tool for securing the cable around the outside pool perimeter.
A 4’ overlap is provided with all aboveground winter covers. For example, a 24’ round winter cover has a cover size of 28’ round providing an additional 2 feet all the way around, allowing the cover to rest on the water surface at the winterizing level.
All Standard & Deluxe Aboveground Winter Covers come with a full warranty against seam separations only. (Standard – 2 Year Full, Deluxe 3 Year Full)*
*Surface abrasion or pin holes due to high winds, punctures, tears or critter damage are not covered under the Aqua-Guard warranty. To prevent wind damage, consider using wall bags to provide gentle “in-pool” cover weight to your cover.
Water loss over the winter due to liner leaks will add stress to the winter cover as the water level drops. Torn grommets or hems caused by water loss is not covered under the Aqua-Guard warranty. Perform a water loss test before closing. Place a piece of painter’s tape on the skimmer faceplate at the current water level with pool water at seasonal temperature. Wait 24 hours. After 24 hours, if water loss is greater than ¼”, your pool liner could be compromised. Contact support@thepoolshoppe.ca or your local pool professional for additional advice.
| Aboveground Pool Size |
Cover Size |
| 12′ Round |
16′ Round |
| 15′ Round |
19′ Round |
| 18′ Round |
22′ Round |
| 21′ Round |
25′ Round |
| 24′ Round |
28′ Round |
| 28′ Round |
32′ Round |
| 12×24 Oval |
16×28 Oval |
| 15×30 Oval |
19×34 Oval |
| 16×26 Oval |
20×30 Oval |
| 16×32 Oval |
20×36 Oval |
| 18×33 Oval |
22×37 Oval |
