| Pool Volume | Stain Prevent Dosage |
|---|---|
| 10,000 L | 240 mL |
-
Sale!Out of stock
Naturally AQUA Stain Prevent is used for the prevention of stains in swimming pools and spas due to the precipitation of metals such as copper or iron. Naturally Aqua Stain Prevent will prevent scale formation and short filter runs. It will also preserve and protect pool equipment, heaters, pipes and fittings from scale formation, clogging and corrosion. If a green or brown colour develops when adding chlorine, this may be due to the copper or iron content in the water. AQUA Stain Prevent will solubilize this material and prevent staining of the pool finish. Directions:Â One capful holds approximately 50 mL. When metals are present, add AQUA Stain Prevent according to the table below:Net Contents: 1 L -
Sale!
AQUA Stain out is the natural way to remove stains from swimming pool or spa surfaces. Made from all natural Ascorbic Acid, this biodegradable cleaner will remove all metal stains from all types of pool surfaces. Must be used in conjunction with AQUA Stain Prevent. Directions:Â Ensure sanitizer level is 1 ppm or less. Add AQUA Stain Out over the surface where the stain is present. Brush the stained areas. After 24 hours, vacuum the entire surface and clean the filter. Net Contents: 850g -
Commercial Grade 20º Baume (31.45%). Recommended for use in swimming pools, descaling, brick cleaning, etc. Always add slowly to water during dilution or preparation - do not mix with any other chemicals. Directions: To adjust pH, add Muriatic around pool water according to the table below:To etch or clean concrete, natural stone and masonry, dilute with water - 1 part acid : 3 parts water. Scrub with a deck brush and rinse thoroughly with water. Rust can be removed from steel, sinks, wall tile and metal furniture by diluting one part acid : 4 parts water. Scrub with a brush and rinse thoroughly with water.pH Reading Amount of Muriatic Acid Required per 50,000 L 7.7 - 7.8 100 mL 7.9 - 8.0 330 mL 8.1 - 8.4 660 mL 8.4+ 1 L -
Sale!
Aqua Guard Vinyl Cleaner is specifically formulated to remove stubborn rings and grease from around swimming pools. Vinyl Cleaner can clean vinyl, tiles, and chrome! Directions:Â Spray Vinyl Cleaner onto soiled area. With a sponge or cloth, clean 2 or 3 feet at a time, using an even, steady pressure. Wipe surface with a damp cloth. Rinse with pool water to remove excess Vinyl Cleaner. For stubborn stains, scrub briskly with a soft brush. Net Contents: 650mL -
Sale!
Aqua-Guard Salt Cell Cleaner is the effective way to clean and de-scale your salt cell. A quick 10 minute clean is all you need to remove the build up of mineral deposits attached to your salt cell plates. Regular cleaning with Salt Cell Cleaner will help prolong the life of your cell, allowing the generator to operate at peak efficiency. Directions:Â Wear rubber gloves and eye protection when handling Salt Cell Cleaner. Disconnect the salt cell from plumbing line. Attach one of of the cell to the Salt Cell Cleaning Stand so the cell is vertical with the open end facing up. Fill the inside of the cell with 1 L of Salt Cell Cleaner. If the cell plates are not fully submerged, add water slowly until the plates are submerged. After 10 - 20 minutes, drain the cell of Salt Cell Cleaner and rinse with water. Net Contents: 1L -
Sale!
Over time, a build-up of mineral deposits and dirt can become trapped between the sand particles of your pool filter. This debris reduces the efficiency of the filtration process by restricting the free flow of water through the spaces between these particles. Aqua Guard Filter Rinse will help rejuvenate your sand filter by dissolving and dislodging these deposits. Regular usage of Filter Rinse whenever you backwash your filter will keep it operating at peak efficiency. Directions:Â Ensure that any automatic devices are closed or by-passed, enabling maximum intake from the skimmer. Before application, remove any debris from the skimmer basket. Set your filter to backwash and slowly pour 250 mL of Filter Rinse into the skimmer so that it goes directly through the filter. Complete the backwash cycle as per manufacturer's instructions.Filter Rinse is only used for Sand Filters. For Cartridge and D.E Filters, see other options below.
Net Contents: 1L -
Sale!
Cartridge Cleaners' twin action is uniquely formulated not only to remove scale but to break down body oils, lotions and greases that build up on the filter media. Regular use of Cartridge Cleaner will assure proper filtration of the water. Directions:Â Rinse the dirty cartridge with clean water to remove loose hair and debris. Add 500 mL of Cartridge Cleaner to 10 litres of warm water in a plastic pail. If the cartridge filter is large, use more Cartridge Cleaner and warm water. Place the cartridge in the cleaning solution and allow to soak for 12 hours. Remove the clean cartridge and rinse thoroughly with clean water. Net Contents 1L -
Sale!
A spot stain remover for iron, copper, and all metal stains, Stain Erase will also remove rust and other stains on vinyl, concrete and fiberglass pool surfaces. Directions:Â Turn off the pump. Using rubber gloves, drop the cloth bag directly onto the stain. Use a pool brush to position the bag over the stain and to keep the bag in place. Remove bag once stain has disappeared. Net Contents: 120g -
Sale!
AQUA Salt Cell Cleaner is an inhibited acidic product designed to remove scale to improve the efficiency of the cell to produce chlorine. For use with all salt cell generators. Directions:Â Turn off power to the pump and salt cell generator and disconnect the cell from the plumbing. Cap one end of the cell or place the entire cell inside a small container for soaking. Fill the cell with product and soak for 5 - 10 minutes. Empty and inspect the cell. Repeat until the plates are clean. Rinse the cell and soak in fresh water. Reconnect he cell to the plumbing and restart the pump and cell. Net Contents: 1L -
AQUA Easy Acid is a much safer product to handle than regular Muriatic Acid. It reduces the noxious fumes associated with using Muriatic Acid. It is safer to handle because it will not attack the skin or protein of the body or cause severe burns. AQUA Easy Acid can be used to clean pools and adjust pH. Directions:Â To adjust pH, add AQUA Easy Acid around pool water according to the table below:For tile cleaning, use Easy Acid in a 1:4 ratio with water. Avoid using on aluminum or metal-plated products as discolouration may occur. Always test on an inconspicuous area before using.pH Reading Amount of Easy Acid Required per 10,000 L 8.0+ 250 mL -
Sale!
AQUA Cover Cleaner cleans and deodorizes winter covers, solar blankets, and water bags. It removes stubborn oils, grease and grime. The fresh pine scent eliminates odours and adds protection during storage. Directions:Â When cleaning the winter cover, remove all major debris and water while it is still on the pool. Spread the winter cover over a smooth flat surface such as a paved driveway. Dilute 250 mL of AQUA Cover Cleaner with 8 L of warm water in a pail. Spread the solution over a small area and work it back and forth with a nylon brush. Continue to do this until the entire cover has been cleaned. Allow the cover to dry completely before storing. Net Contents: 1L
